JAXA Supercomputer System Annual Report April 2020-March 2021

Report Number: R20EA3210

Subject Category: Aeronautical Technology

PDF available here

• Responsible Representative: Takashi Aoyama, Aeronautical Technology Directorate, Numerical Simulation Research Unit
• Contact Information: Yoimi Kojima(kojima.yoimi@jaxa.jp)
• Members: Atsushi Hashimoto, Takashi Ishida, Keiji Ueshima, Minoru Yoshimoto, Ichiro Maeda, Yoshihiro Tachibana, Takashi Aoyama, Kanako Yasue, Hitoshi Arizono, Yoimi Kojima

Abstract

The aircraft dynamic stability is an essential information for evaluating the flight stability and designing the aircraft maneuver control systems. But there are limitations for the textbook-based estimations and the wind tunnel tests and, therefore, the CFD-based stability analysis is expected to dissolve the limitations. Our objective in this research is to apply FaSTAR, a high-speed solver for compressible flow developed in JAXA, for predicting the dynamic derivatives to validate the accuracy of the code.

Reference URL

N/A

Reasons and benefits of using JAXA Supercomputer System

The prediction for the dynamic derivatives requires quite a bit of numerical simulations, both for steady and unsteady states. The vast computational resources provided by JSS allow us to enhance the process and make it much faster than we do them on desktop computers.

Achievements of the Year

We conducted steady and unsteady numerical simulations over a Standard Dynamics Model (SDM) for predicting the dynamic derivatives. We employed RANS (Reynolds-Averaged Navier-Stokes equation) method for simulating the turbulent flows over the model; the Spalart-Allmaras model is adopted for the closure. The pressure field visualization around the SDM (figure 1) indicates that the simulations are conducted properly. We also compared the derivatives with experimental results (figure 2) and confirmed that the simulation could provide accurate predictions for aircraft's dynamic stability.

Fig.1: Pressure distribution around the SDM model (AoA=5 deg., M=1.2)

Fig.2: Dynamic stability derivatives for the SDM model over the Mach number

Publications

N/A

Usage of JSS

Computational Information

• Process Parallelization Methods: MPI
• Thread Parallelization Methods: N/A
• Number of Processes: 64 - 128
• Elapsed Time per Case: 144 Hour(s)

Resources Used(JSS2)

Fraction of Usage in Total Resources*1(%): 0.04

Details

Please refer to System Configuration of JSS2 for the system configuration and major specifications of JSS2.

*1: Fraction of Usage in Total Resources: Weighted average of three resource types (Computing, File System, and Archiver).

*2: Fraction of Usage：Percentage of usage relative to each resource used in one year.

Resources Used(JSS3)

Fraction of Usage in Total Resources*1(%): 0.13

Details

Please refer to System Configuration of JSS3 for the system configuration and major specifications of JSS3.

*1: Fraction of Usage in Total Resources: Weighted average of three resource types (Computing, File System, and Archiver).

*2: Fraction of Usage：Percentage of usage relative to each resource used in one year.

JAXA Supercomputer System Annual Report April 2020-March 2021